Microlab

Rx signals, delivered from the fiber system to the RF network, may be too high for the network

DAS fiber systems accept usually 0dBm input levels but there are variations depending on the manufacturer. A multi-carrier

There are basically 3 types of broad-band microwave splitter/combiners: Wilkinson, Reactive (Air-Line) and Hybrid. Wilkinson: Generally low-cost micro-strip

In general the answer is yes. Wilkinson, Reactive (Airline) and Hybrid circuits are all reciprocal devices, meaning that

Both combine signals to a common path, but do so in different ways. Filter combiners are band specific

Combiner loss is a term that refers to the theoretical loss that is incurred in a power combining

Signal combining refers to the addition of multiple signals (from one or more operators) to a single output

Directional couplers are directional in the sense that the coupled port only couples the signal going from the

System designers have a choice in the use of directional couplers, tappers or unequal splitters in the “main

A cross band coupler refers to the same type of device as a diplexer or filter combiner. These devices